China Standard Grade U2 U3 Marine Anchor Chain Stud Link Anchor Chain bush chain

Product Description

Product Description
Stud Link and Studless Link Anchor Chain are widely used on Floating Equipment, Ships(Boats), Oil Rigs and Mooring Buoys.
Lift-Sunny supply wide range of sizes and grades: Grade U1/ U2 / U3 from 12.5mm to 162mm; Grade ORQ / R3 /R3S / R4 from 58mm to 162mm.
Chains are available with LR, ABS, DNV-GL, NV, NK, KR, TINA, CCS, RS certificate and requirement of ISO1704, GB/T 549, JIS F3303, Gost 228, IACS, OCIMF, API and other international regulations.

Technical Data and Dimensions
Stud Link Anchor Chain

d(φ) CHAIN LINK SIZE AM1 AM2 AM3 APPROX.
U1 STUD LINK CHAIN U2 STUD LINK CHAIN U3 STUD LINK CHAIN WEIGHT
6d 3.6d PER
DIAMETER OUTSIDE OUTSIDE PROOF BREAKING PROOF BREAKING PROOF BREAKING 27.5M
LENGTH WIDTH LOAD LOAD LOAD LOAD LOAD LOAD
(in.) (mm.) (mm.) (mm.) (kn.) (kn.) (kn.) (kn.) (kn.) (kn.) (kg.)
1/2 12.5 75 45 46 66 66 92 92 132 98
9/16 14 84 50.4 58 82 82 116 116 165 119
5/8 16 96 57.6 76 107 107 150 150 216 156
11/16 17.5 105 63 89 127 127 179 179 256 186
3/4 19 114 68.4 105 150 150 211 211 301 230
13/16 20.5 123 73.8 123 175 175 244 244 349 260
7/8 22 132 79.2 140 200 200 280 280 401 300
15/16 24 144 86.4 167 237 237 332 332 476 370
1-1/16 26 156 93.6 194 278 278 389 389 556 431
1-1/8 28 168 100.8 225 321 321 449 449 642 496
1-3/16 30 180 108 257 368 368 514 514 735 564
1-1/4 32 192 115.2 291 417 417 583 583 833 635
1-5/16 34 204 122.4 328 468 468 655 655 937 712
1-7/16 36 216 129.6 366 523 523 732 732 1050 800
1-1/2 38 228 136.8 406 581 581 812 812 1160 887
1-9/16 40 240 144 448 640 640 896 896 1280 1032
1-5/8 42 252 151.2 492 703 703 981 981 1400 1084
1-3/4 44 264 158.4 538 769 769 1080 1080 1540 1197
1-13/16 46 276 165.6 585 837 837 1170 1170 1680 1310
1-7/8 48 288 172.8 635 908 908 1270 1270 1810 1438
2 50 300 180 686 981 981 1370 1370 1960 1546
2-1/16 52 312 187.2 739 1060 1060 1480 1480 2110 1661
2-1/8 54 324 194.4 794 1140 1140 1590 1590 2270 1791
2-3/16 56 336 201.6 851 1220 1220 1710 1710 2430 1926
2-5/16 58 348 208.8 909 1290 1290 1810 1810 2600 2086
2-3/8 60 360 216 969 1380 1380 1940 1940 2770 2249
2-7/16 62 372 223.2 1030 1470 1470 2060 2060 2940 2361
2-1/2 64 384 230.4 1100 1560 1560 2190 2190 3130 2516
2-9/16 66 396 237.6 1160 1660 1660 2310 2310 3300 2676
2-11/16 68 408 244.8 1230 1750 1750 2450 2450 3500 2885
2-3/4 70 420 252 1290 1840 1840 2580 2580 3690 3571

d(φ) AM2 AM3 APPROX.
U2 STUD LINK CHAIN U3 STUD LINK CHAIN WEIGHT
PER
DIAMETER PROOF
LOAD
BREAKING
LOAD
PROOF
LOAD
BREAKING
LOAD
27.5M
(mm.) (kn.) (kn.) (kn.) (kn.) (kg.)
73 1990 2790 2790 3990 3274
76 2150 3571 3571 4300 3548
78 2260 3160 3160 4500 3737
81 2410 3380 3380 4820 4030
84 2580 3610 3610 5160 4334
87 2750 3850 3850 5500 4650
90 2920 4090 4090 5840 4976
92 3040 4260 4260 6080 5119
95 3230 4510 4510 6440 5544
97 3340 4680 4680 6690 5780
100 3530 4940 4940 7060 6143
102 3660 5120 5120 7320 6398
105 3850 5390 5390 7700 6773
107 3980 5570 5570 7960 7033
111 4250 5940 5940 8480 7569
114 4440 6230 6230 8890 7983
117 4650 6510 6510 9300 8409
120 4850 6810 6810 9720 8863
122 5000 7000 7000 9990 9143
124 5140 7200 7200 15710 9598
127 5350 7490 7490 1571 9908

Open Link/Studless Anchor Chain

d(φ) CHAIN LINK SIZE BM1 BM2 BM3 APPROX.
U1 OPEN LINK CHAIN U2 OPEN LINK CHAIN U3 OPEN LINK CHAIN WEIGHT
6d 3.6d PER
DIAMETER OUTSIDE OUTSIDE PROOF BREAKING PROOF BREAKING PROOF BREAKING 27.5M
LENGTH WIDTH LOAD LOAD LOAD LOAD LOAD LOAD
(in.) (mm.) (mm.) (mm.) (kn.) (kn.) (kn.) (kn.) (kn.) (kn.) (kg.)
1/2 12.5 75 45 28.75 57.81 41.2 82.6 56.4 112.8 85.41
9/16 14 84 50.4 34.78 69.93 51 101.9 70.76 141.51 106.55
5/8 16 96 57.6 47.1 94.72 66.2 132.3 92.42 184.83 139.43
11/16 17.5 105 63 56.35 113.31 78.89 157.78 110.55 221.1 178.35
3/4 19 114 68.4 66.42 133.57 93.6 187.2 130.32 260.64 217.68
13/16 20.5 123 73.8 77.33 155.49 108.64 217.27 151.7 303.42 229.14
7/8 22 132 79.2 89.06 179.08 125.4 250.9 174.4 349.4 264.49
15/16 24 144 86.4 105.98 213.25 149.9 298.9 207.9 415.8 341.82
1-1/16 26 156 93.6 124.38 250.12 175.4 350.8 244 488 369.94
1-1/8 28 168 100.8 144.26 290.08 203.8 406.7 283 566 427.04
1-3/16 30 180 108 165.6 333 234.2 467.5 324.9 649.8 490.98
1-1/4 32 192 115.2 188.42 378.88 265.6 531.2 369.6 739.3 559.65
1-5/16 34 204 122.4 212.7 427.72 299.9 599.8 417.3 834.6 671.52
1-7/16 36 216 129.6 238.46 479.52 336.1 672.3 467.8 935.7 707.85
1-1/2 38 228 136.8 265.7 534.28 374.4 748.7 521.3 1042.5 788.98
1-9/16 40 240 144 294.4 592 414.5 829.1 577.6 1155.2 869.36
1-5/8 42 252 151.2 324.58 652.68 457.7 915.3 636.8 1273.6 959.3
1-3/4 44 264 158.4 356.22 716.32 502.7 999.6 698.9 1398 1111.25
1-13/16 46 276 165.6 389.34 782.92 548.8 1097.6 763.9 1527.8 1152.07
1-7/8 48 288 172.8 423.94 852.48 597.8 1195.6 831.7 1663.5 1256.26
2 50 300 180 460 926.09 648.8 1293.6 902.5 1805 1360.41
2-1/16 52 312 187.2 497.54 1000.48 697.63 1395.26 976.14 1952.28 1485.61
2-1/8 54 324 194.4 536.54 1078.92 752.33 1504.66 1052.68 2105.36 1648.08
2-3/16 56 336 201.6 577.02 1160.32 809.09 1618.18 1132.1 2264.2 1715.97
2-5/16 58 348 208.8 618.98 1244.68 867.91 1735.82 1214.4 2428.8 1844.5
2-3/8 60 360 216 662.4 1332 928.8 1857.6 1299.6 2599.2 1973.29
2-7/16 62 372 223.2 707.3 1422.28 991.75 1983.5 1387.68 2775.36 2101.56
2-1/2 64 384 230.4 753.66 1515.52 1056.77 2113.54 1478.66 2957.32 2298.47
2-9/16 66 396 237.6 801.5 1611.72 1123.85 2247.7 1572.52 3145.04 2398.1
2-11/16 68 408 244.8 850.82 1710.88 1192.99 2385.98 1669.26 3338.52 2522.88
2-3/4 70 420 252 901.6 1813 1264.2 2528.4 1768.9 3537.8 2697.65

BUSINESS FAQ: 

1) What is the MIN order quantity ?
USD 1580 in total value, usually 1 ton.

2)What is the delivery time?
15 -20 days since received the deposit.

3)What is the Payment term?
A. 30% TT deposit, the balance against copy B/L.
B. Irrevocable L/C at sight.
C. Other payment can be negotiated.
 

4)Could I get free samples before first cooperation? 
Yes, of course! But the buyer need to afford express fee, which is returnable once we build cooperation.

5)What’s the packing method?
Packing methods for most of the products are in the following photos.Special packages are available CZPT customers’need. You can contact us for special or more detailed packages.

Why choose Lift-Sunny (lift-sunny )
1). “ONE-STOP” Rigging and Marine supplier:  a great variety of rigging and marine products including 1,000 kinds of products, 3,000 kinds of specifications, which are widely used in Construction,Transportation, Forestry, Oil&Gas, Agriculture, Utilities, Aerospace, Marine, Manufacturing, Mining, Fishing and Government. 

2). Old history: since 1986, more than 30 years focus on rigging, marine and rubber products.The founding principles of the company have never changed-business integrity,quality is everything.

3). Strong development capabilities: processing with Given materials and samples at own module workshop, save cost, finish customers special and big order rapidly.

4). 4 round Superior Quality Control with 10 years records and zero complaint: 4 round quality inspection including raw materials,production,finished products,final package,have a thorough quality control system, professional staff, every step is under strict inspection, to insure that every product is perfect.
For the individual and mass production part, the records which include the sub-contractor records will be retained at least 10 years since the record has been made, (e.g. inspection/test record, control plan, etc)
In the past years,the complaint rate of product quality from more than 50 countries customers is zero.

5). Certificate of Quality: ISO9001, CE, GS, CCS, ABS, BV, KR, REACH, etc. Photos as below.

6). Reasonable and Competitive price compared with others with same quality.

7). Fast Delivery time: within 20 days for most products.

8). Comfortable and topping after-sales service with 99.8% satisfaction rate for more than 50 countries and regions: We will send you “Customer Satisfaction Inventory” after you receive our first order. If you are not satisfied with our quality,price or service, please list your comments or suggestions, the next day, our senior manager will personally call you or email you, apologize to you, to solve your problem.Because day after day, year after year of self-correction, our current customer satisfaction rate has reached 99.8%. we are very proud of this. Of course, we still need to continue to work hard.Our main marketing as below picture.

9). Great Supports for marketing. With us, your money and business in safe.If you want to be No.1 you should contact with us right now!

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Usage: Transmission Chain, Drag Chain, Conveyor Chain, Boat Berthing
Material: U1:Cm370; U2:Cm490; U3:Cm690
Surface Treatment: Baking Paint
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

chain

What is a roller chain?

What is a roller chain? A roller chain is a transmission system that transmits power from one shaft to another. Internal lubricant helps chains last longer and are interchangeable. Chains are usually made of carbon or alloy steel. Stainless steel is sometimes used in food processing machinery or in environments where lubrication is problematic. Brass and nylon are also sometimes used. If you need to slow down the machine, nylon chains can be used.

Roller chains are used to transmit power from one shaft to another

Generally speaking, the life of a roller chain is limited by three main factors: wear, corrosion, and fatigue. These can be minimized by following some simple guidelines. For optimum performance, the roller chain must be lubricated. Proper lubrication reduces friction and extends product life. Remember that corrosion and wind resistance can adversely affect lubrication, so protect the product properly.
A chain is a mechanical device used to transmit power from one shaft to another. The chain consists of a series of steel plates called bushings. Bushings are attached to the roller chain by pins or bushings. The block and bushing are held together by pins or bushings C riveted to the outer link D. The chain is also attached to the sprocket and bucket by pins or hooks. Chain pitch is measured between hinge centers, usually denoted p.
There are three types of chains: single-strand standard series, multi-strand standard series, and silent chain. Single strand chains are the most common type and cover a wide range of drive loads. Multi-strand chains provide greater power capacity without increasing chain pitch or line speed. An inverted tooth chain is a variant of a single-strand chain that eliminates the noise caused by pitch-related friction.
The inner and outer plates of the roller chain drive are made of steel. The rollers are positioned evenly between the chain links and are fastened to the sprockets. In addition, the rollers can rotate freely within the bushing. The chain links are arc-shaped and mesh with the sprocket teeth to transmit power through the chain.
Chain drives are another common way of transmitting mechanical power. These are the simplest forms of power transmission and are used on conveyor belts and other low-speed applications. The chain wraps around the sprocket and passes through the sprocket whose teeth mesh with the links. This mechanism transfers mechanical power from one shaft to another, increasing speed.

They are interchangeable

There are many different types of roller chains, but most are made of steel. Although they have their own advantages and features, they are generally interchangeable. You can buy different kinds of roller chains from domestic and foreign manufacturers, and you can choose the one that best suits your needs. Bearing Services can help you choose the right bearing for your application needs and budget. Here are some important things to consider before buying a roller chain. Here are some tips to make it easier for you to buy the right type of chain.
When choosing the right roller chain, be sure to consult the available size charts. Depends on how much chain you need to move the load you need to move. Remember that roller chains can be manufactured to fit a variety of machines and must meet your specific needs. Also, the chain should be long enough for the machine you are using. Make sure to buy a chain made of high-quality materials.
Double pitch roller chains have a flat top surface and are used in many different conveying applications. Double-pitch load-carrying roller chains, also known as oversized roller double-pitch chains, have rollers that extend beyond the sidebars to carry products. Double pitch drive series roller chains are used in elevators, long conveyor drives, agricultural machinery, and commercial sprinkler systems.
The tensile strength of a roller chain is a key factor to consider before purchasing a chain. The tensile strength of a chain is a function of the maximum force the chain can withstand before breaking. The three different types of tensile strength represent the force a chain can withstand without breaking. Each chain also has different strengths that can determine the type of chain you need.
The outer and inner links of the roller chain are designed for bearings. This allows the chain to be paired or unpaired with its internal links. The outer link has a pin, and the inner and outer pins are press-fit into the connecting plate. These links are usually made of steel and have a tensile strength of about 20 times their weight. The fatigue strength of two-pitch offset links is the same as that of the base chain.

They reduce wear with internal lubricants

In a roller chain, the pins and bushings rotate inside the chain without lubricant on the outside. They are in contact with the teeth of the sprocket and can easily wear out if not lubricated. The plates that connect the links and pivot about the pins can also rub against each other and cause wear. This is where lubricants come in handy. Without lubricant, the bare metal of the plate and bushing would rub against each other.
The lubricant should have the appropriate viscosity to penetrate critical internal surfaces and form an effective oil film. Recommended viscosities are listed in Table 1. Lubricants must be clean and non-corrosive. For roller chains, a good quality non-clean petroleum base oil is sufficient. While defoamers are not required, other additives such as antioxidants and extreme pressure inhibitors may be useful. However, impure oils should be avoided due to the risk of damage.
The shape of the spray head 10 overlaps with a conventional drive chain 12. The drive chain includes a plurality of rollers 24 and roller link plates 26. Each roller includes a roller pin 29 and is connected to a pair of pin link plates 28. Most drive chains have critical wear points on the sides of the roller pins 29. The shape of the spray head 10 prevents overspray onto the central portion of the roller.
In addition to preventing wear, these chains have unique specifications. Manufacturer CZPT requires raw material suppliers to certify that their products meet standards set by the American Society of Mechanical Engineers (ASME). CZPTs do not accept uncertified raw materials. For safety, the machine must be turned off before attempting to measure the chain. After the system is shut down, the measurement process should be completed in accordance with safety procedures.
General spray oil has lubricating properties, but is not as good as other types of chain lubricants. These are typically used for rust protection and include antioxidant chemicals. Generally, they are inexpensive and widely available in retail stores. However, they have the disadvantage of being very penetrating and difficult to apply evenly. Oil cannot stay on the chain as it spins, which can accelerate wear and corrosion.
chain

They can be used to speed up or slow down machines

Typically, roller chains are chains used to move mechanical system components. Unlike belts, roller chains can be used to speed up or slow down a machine. The main difference between belts and roller chains is the lubrication process. Belts use lubrication to help them move at a constant speed, but should not exceed the critical speed of the roller chain. This critical speed is not easy to determine and lubrication is critical to its life.
A roller chain is a chain consisting of a steel bushing that holds the inner plate A and pins C together. Pin C is riveted to outer link D, while roller R surrounds each bushing B. The teeth of the sprocket are supported on the rollers. They spin freely on pins and bushings, reducing friction.
The chains can be single-stranded, double-stranded, or multi-stranded. The rated power capacity of the single strand chain can meet various drive load requirements. Multi-strand chains provide higher power capacity without increasing chain pitch or line speed. The silent chain, also known as the inverted tooth chain, consists of a series of toothed chainplates. The pins of the chain are pressed into the wide ends of the sidebars and outer links.
Although roller chains are a common mechanical component, they can fail under certain conditions. The most common cause of excessive wear is wrong to load sizing. Each manufacturer sets a maximum workload for its product. A chain that is too small for the load carried will not run smoothly and may cause premature failure. Chains can also fail due to rust or improper maintenance.
There are many ways to choose the correct size roller chain. The easiest way to choose the right one is to use a horsepower chart to determine the speed of the motor. RPM will determine the size of the chain and the number of teeth on the drive sprocket. Conveyor chains offer a variety of options to move products horizontally or vertically, even around bend radii.

China Standard Grade U2 U3 Marine Anchor Chain Stud Link Anchor Chain   bush chainChina Standard Grade U2 U3 Marine Anchor Chain Stud Link Anchor Chain   bush chain
editor by CX 2023-07-07