China Standard Heavy Type Short Pitch Roller Chain Link Chain Conveyor Chain manufacturer

Product Description

CZPT rollers enhance rotation on the bushing while reducing impact loads on the sprocket tooth during operation.

All components are heat treated to achieve maximum strength. All components are heat treated to achieve maximum strength.

Pre-loaded during the manufacturing process to minimize initial elongation.

Hot dipped lubrication ensures 100% lubrication of all chain components to extend wear life and reduce maintenance costs.

ISO
NO.
ANSI
NO.
PITCH  ROLLER
LINK
WIDTH
ROLLER
DIA
PIN PLATE MIN. TENSILE
STRENGTH
AVG. TENSILE
STRENGTH
MAX. ALLOWABLE
LOAD
Pt
P W D d Lc L T H
mm mm mm mm mm mm mm mm kgf kgf kgf mm
08AH 40H 12.700 7.850 7.850 3.980 19.000 20.100 12.00 2.00 1,700 2,100 400 NIL
10AH 50H 15.875 9.400 9.400 5.090 21.800 23.700 15.00 2.40 2,670 3,300 670 NIL
12AH 60H 19.050 12.580 12.580 5.960 30.200 34.800 18.00 3.20 3,830 4,550 980 NIL
16AH 80H 25.400 15.750 15.750 7.940 37.400 42.800 24.10 4.00 8,000 9,400 1,700 NIL
20AH 100H 31.750 18.900 18.900 9.540 44.500 50.600 30.10 4.80 10,650 13,700 2,500 NIL
24AH 120H 38.100 25.230 25.230 11.110 55.000 61.600 36.20 5.60 15,320 19,000 3,350 NIL
28AH 140H 44.450 25.230 25.230 12.710 59.000 66.400 42.20 6.40 20,850 23,000 4,400 NIL
32AH 160H 50.800 31.550 31.550 14.290 69.400 77.300 48.20 7.10 27,240 31,000 5,750 NIL
36AH 180H 57.150 35.490 35.490 17.460 77.300 86.400 54.30 7.90 30,040 34,500 6,600 NIL
40AH 200H 63.500 37.850 37.850 19.850 87.100 97.300 60.30 9.50 42,550 59,000 7,750 NIL
48AH 240H 76.200 47.350 47.350 23.810 111.400 121.900 72.40 12.70 63,730 71,000 10,500 NIL
12AH-2 60H-2 19.050 12.580 12.580 5.960 56.300 60.900 18.00 3.20 7,660 9,300 1,650 26.11
16AH-2 80H-2 25.400 16.760 15.750 7.940 70.000 75.400 24.10 4.00 16,000 18,800 2,800 32.59
20AH-2 100H-2 31.750 18.900 18.900 9.540 83.600 89.700 30.10 4.80 21,300 27,400 4,250 39.09
24AH-2 120H-2 38.100 25.230 25.230 11.110 103.900 110.500 36.20 5.60 30,640 38,000 5,650 48.87
28AH-2 140H-2 44.450 25.230 25.230 12.710 111.200 118.600 42.20 6.40 41,700 45,000 7,400 52.20
32AH-2 160H-2 50.800 31.550 31.550 14.290 131.300 139.200 48.20 7.10 54,480 62,000 9,600 61.90
36AH-2 180H-2 57.150 35.490 35.490 14.760 146.500 155.600 54.30 7.90 60,080 69,000 11,000 69.16
40AH-2 200H-2 53.500 37.850 37.850 19.860 165.400 175.600 60.30 9.50 85,100 98,000 12,850 78.31
48AH-2 240H-2 76.200 47.350 47.350 23.810 212.600 223.100 72.40 12.70 127,460 142,000 17,700 101.22

Usage: Transmission Chain, Conveyor Chain, Heavy Type Short Pitch Roller Chain
Material: Alloy/Carbon Steel
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 1/2"*3"
Structure: Roller Chain
Samples:
US$ 10/Meter
1 Meter(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

chain

Different types of drive chains

Drive chains are an important part of many different types of machinery. In this article, we’ll cover a variety of different types, from square links to engineered steel. From there, we’ll discuss different types of chains, such as double and leaf chains. Let’s take a closer look at each one. Once you know what kind of chain you’re looking for, you can make a buying decision. If you’re not sure where to start, read on to learn more about these types of chains, what to look for when choosing, and how to choose the right chain for your specific application.

Engineering Steel Chain

Engineering steel chains are widely used in conveyors, bucket elevators, tensioning links, transmission chains, etc., and have the characteristics of high strength, low friction, and good shock resistance. Early models of these chains were developed for difficult-to-convey applications. They were originally made of all-steel components with flanged rollers made of cast iron. They then increase in size, strength, and spacing in response to the heavy-duty requirements of the industry.
Today, these chains are used in a wide variety of applications, including tough oil drilling operations and forklifts. They offer excellent durability and high power transfer and are available in a variety of materials. They are also ideal for harsh environments such as harsh oil drilling. Their high-strength steel construction means they can handle harsh operating conditions. Their durability is an essential feature of any chain, and CZPT Chains offers a full line of engineered steel chains to meet your exact specifications.
A drive chain made of engineered steel consists of several components: links, pin joints, and sprockets. This allows them to carry heavy loads with minimal stretch. Due to its internal mechanical advantage, the chain runs around the sprockets with almost 100% efficiency. Also, the chain is made of special steel that can withstand certain conditions. They are available in different alloys and grades. If you have any questions, please feel free to contact us.
Roller chain wear is a major problem for conveyor and drive chains. In these cases, the rollers of the chain are more prone to wear than the bushings, so lubrication is essential. Many chains are designed to work with little or no lubrication. Finally, material selection is an important factor in the design of engineered steel conveyor chains. These factors will help ensure that the chain stays in good shape.

Conveyor Chains with Square Links

There are two basic types of conveyor chains. The first is the square chain, commonly used in cranes and hoists. It’s cheap to manufacture but more prone to overload. The second is a chain that uses hook joints or detachable links. These are used for short-term power transmission and have a lubricating effect. Usually, they are made of malleable iron but can be more expensive.
Another type of chain is the removable steel chain. For moderate loads, this is an easy-to-install option. The closed end of the tab should face the sprocket. It is very important to maintain the alignment of the chain relative to the sprockets. The chain should be adjusted to suit the load before installation. It is important to keep the chain lubricated to prolong its life.
Steel chains offer a wider selection of materials and heat treatments. This chain is also more accurate than its counterpart. Steel bushing chains are less expensive but require more frequent lubrication. Steel roller chains are often used for long conveyor centers or high loads. However, lower friction requirements require lower strength chains. This means that chains with square links are a better choice for smaller conveyors. But this style has its drawbacks.
Bushing chains are made of steel and are an excellent alternative for small-scale applications. The pins are silent and prevent tooth damage. Bushed roller chains are also used to a certain extent as conveyor chains. However, the main advantage of the bushing roller chain is that it does not make any noise at all. Bushed roller chains are made of alloy steel and are suitable for very low-speed applications.
chain

double chain

Double-strand roller chain, also known as a double-strand, consists of two rows of single-strand links. It has high impact strength, low weight, and a small form factor. Duplex roller chains are manufactured using CZPT technology, which uses solid rollers to improve sprocket tooth rotation and reduce shock loads. During the manufacturing process, the metal is heat-treated to increase strength and reduce corrosion.
A single chain is designed for a single sprocket, while a double chain consists of two identical chains connected side by side. Double chains are more durable than simple chains because double rollers contain roller bearings, pins, and other components. Simplex drive chains can handle high loads, while duplex drive chains are designed for medium-duty applications.

leaf chain

Blade chains are used in reciprocating devices such as forklifts. They are also used in machine tools for counterweight chains. Leaf chains come in a variety of lengths, usually with female or male ends. Leaf chains can be manufactured in even or odd pitches and are ideal for lifting and balancing. This article will introduce some key uses of leaf chains in drive chains. Additionally, we’ll discuss how they are made and how they behave in applications.
Most drive chains today are made from leaf chains. These chains are designed to increase the strength of the chain. However, they are less expensive than other types of chains. You can also purchase specialized leaf chains for certain applications. CZPT Chain also offers custom leaf chains for your unique needs. Leaf chains are commonly used in forklifts, material handling, and lifting applications. They are usually made from high-quality components. The BL1688 Leaf Chain has 8 x 8 laces and is sold in 10-foot boxes or 25- to 100-foot reels. The leaf chain can be cut as needed.
When selecting a leaf chain for a specific application, consider the minimum tensile strength of the chain. The minimum breaking strength must be high enough to protect the worker or machine, but must also be legal for the type of machine. Most manufacturers publish this minimum strength requirement. To make the most durable leaf chain, design engineers must consider the ISO4347 standard when choosing the right leaf chain. Leaf chain manufacturers tend to exceed international standards by about 20%.
chain

roller chain

Roller chains are made from a variety of materials. Some common materials include steel and stainless steel. The most suitable material depends on cost, environmental conditions, and horsepower transmission design. Chain manufacturers can optimize the material for the intended use. Depending on its size, spacing, and special construction techniques, it can be made lighter or heavier. This is an advantage for applications in noise-sensitive environments. Below are some examples of common uses for roller chains.
The wear of the components in a roller chain is an unavoidable part of its operation. The amount of elongation depends on factors such as lubrication, load, and the frequency of articulation between the pin and bushing. Manufacturing critical wear parts require careful attention to detail. Proper raw materials, manufacturing, and assembly are critical to product performance and longevity. If these components aren’t of high quality, they won’t last as long as the chain should.
The industry recommends measuring the wear elongation of the roller chain to determine when it needs to be replaced. Proper safety procedures must be used to measure chain tension. The tight span of the chain shall be measured by applying the measuring load specified by ANSI. A correctly measured roller chain is safe to use. For motorcycles, the chain is bigger and stronger. Often, toothed belts are replaced by shaft drives because they are less noisy and require less maintenance.
Tensile strength is the most commonly used measurement method for roller chains. This measurement represents the amount of load the chain can withstand before it breaks. Fatigue strength is another measure of durability. Fatigue strength measures how long a roller chain can withstand long-term use before failing. These two measurements are closely related and maybe the same or different. In addition to tensile strength, fatigue strength is a useful factor to consider when purchasing a chain.

China Standard Heavy Type Short Pitch Roller Chain Link Chain Conveyor Chain   manufacturer China Standard Heavy Type Short Pitch Roller Chain Link Chain Conveyor Chain   manufacturer
editor by CX 2023-07-11